|
CircuitLogix | 电子设计自动化(EDA)软件培训 |
|
班级人数--热线:4008699035 手机:15921673576( 微信同号) |
增加互动环节,
保障培训效果,坚持小班授课,每个班级的人数限3到5人,超过限定人数,安排到下一期进行学习。 |
授课地点及时间 |
上课地点:【上海】:同济大学(沪西)/新城金郡商务楼(11号线白银路站) 【深圳分部】:电影大厦(地铁一号线大剧院站)/深圳大学成教院 【北京分部】:北京中山学院/福鑫大楼 【南京分部】:金港大厦(和燕路) 【武汉分部】:佳源大厦(高新二路) 【成都分部】:领馆区1号(中和大道) 【广州分部】:广粮大厦 【西安分部】:协同大厦 【沈阳分部】:沈阳理工大学/六宅臻品 【郑州分部】:郑州大学/锦华大厦 【石家庄分部】:河北科技大学/瑞景大厦
开班时间(连续班/晚班/周末班):2020年6月15日 |
课时 |
◆资深工程师授课
☆注重质量
☆边讲边练
☆若学员成绩达到合格及以上水平,将获得免费推荐工作的机会
★查看实验设备详情,请点击此处★ |
质量以及保障 |
☆
1、如有部分内容理解不透或消化不好,可免费在以后培训班中重听;
☆ 2、在课程结束之后,授课老师会留给学员手机和E-mail,免费提供半年的课程技术支持,以便保证培训后的继续消化;
☆3、合格的学员可享受免费推荐就业机会。
☆4、合格学员免费颁发相关工程师等资格证书,提升您的职业资质。 |
☆课程大纲☆ |
|
- QHM 软件是基于Windows系统的水域连续流量和质量模拟模型,主要针对水域管理和雨水设计。
- QHM is a Windows-based continuous watershed quantity and quality simulation model intended for watershed management and stormwater design. The program can also be used as an effective teaching tool. Most applications have been watershed analysis usually related to selection and sizing of stormwater BMPs, particularly, flow control and treatment ponds. QHM offers an important planning and design tool to watershed managers and designers of stormwater quantity and quality control systems.
- QHM is capable of continuous simulation of:
- Surface runoff and base flow
- Detention pond routing
- Reservoir routing
- Soil freeze-thaw
- Snowmelt and snow removal/disposal
- Evaporation and evapotranspiration
- Pollutant generation and routing
- Stream erosion potential
- QHM is capable of continuous simulation of:
- Surface runoff and base flow
- Detention pond routing
- Reservoir routing
- Soil freeze-thaw
- Snowmelt and snow removal/disposal
- Evaporation and evapotranspiration
- Pollutant generation and routing
- Stream erosion potential
- QHM simulation can represent a period of indefinite length (limited only by available disk space). The model can be used on a discrete event or multi-event continuous basis.
- QHM Constituents
- Constituents that can be simulated are: stormwater runoff (flow rate and volume) and, optionally, one or any combination of: one pollutant exhibiting first-order decay or characteristics simulated using a rating curve; sediments (in up to five size fractions) characterized by discrete particle settling; and instream erosion indices based on cumulative excess boundary shear stress.
- Appropriate flow and pollutant records obtained elsewhere (monitoring or other simulation models) can be routed through ponds or river reaches by the model.
- QHM System Components
- Components of a physical system that can be simulated are:
- Catchments
- Detention ponds
- Reservoirs
- River reaches which may have junctions and bifurcation (flow splits)
- A system comprised of any combination and any number of the above components can be simulated provided that each component of the system and the system as a whole can be described as "one-way" or "non-feedback."
- Looping networks, or ponds where outflow depends on water depth in the receiving channel, are examples of situations which might not be well-represented in this model. A typical application appropriate for QHM would be a dendritic river network with channels adequately represented by uniform flow conditions.
- QHM ORGANIZATION
- When the QHM program opens, the user can select from seven options of which four represent standard Windows utilities. The other three are specific to QHM: HELP, RUN, and UTILITY; these are introduced here and explained in more detail below.
- The HELP menu includes, in addition to Windows Help, the complete contents of the user's manual.
-
- The RUN menu includes three commands:
- RUN QHM starts a simulation run using information provided under UTILITY/SET RUN OPTIONS; if specified by the user, the options will be displayed before the run commences.
- INPUT INTERFACE, which is described below, allows the user to create a new input file. Some users will prefer to create a new file using the FILE and EDIT commands to modify an existing file.
- PLOT GRAPH is used to select, view, and print a graph previously created using the UTILITY/CREATE GRAPH command.
- UTILITY also includes three commands:
- CONVERT DATA FORMAT changes standard data formats for precipitation, temperature, and flow into other standard formats. It can also be used to ignore meteorological data that is not needed for a simulation run, and to remove from a file, error codes that will not be recognized by QHM.
- CREATE GRAPH FILE will identify files and simulation periods for a graph to be viewed and printed by the RUN/PLOT, GRAPH command.
- SET RUN OPTIONS allows determination of the files to be used in the next simulation run; whether, during a simulation run, the name of the command that is currently being executed will be displayed; and the output to be displayed when a simulation run is complete (this option is not available if the previous one is selected).
- The DEFAULT button will display settings that many users prefer.
-
- The QHM program is structured as a series of commands which are summarized in the PROGRAMS COMMAND section herein and described in detail in the user's manual.
- GETTING STARTED WITH QHM
- This section summarizes information that a user must have at hand before using QHM. Appendix A of the user's manual includes three step-by-step exercises that will guide a first-time user through the basic operation of QHM.
- Defining the Problem
- It is assumed that the user has identified the problem that the simulation will address:
- What is to be simulated - flow; quality parameters; stream erosion; snow removal
Calibration - flow; quality
System components and configuration - a system schematic; identifying sub-watersheds; stream reaches; ponds; and reservoirs
QHM Input Data
-
- Further details about input data requirements and file formats are provided in the INPUT DATA section of the user's manual. Required data includes:
- Meteorological data as required by the proposed simulation - precipitation file, extension .pre; temperature file, extension .tmp; evaporation data, to be entered in input file
- Calibration data - flow, extension .flo; quality, extension depends on parameter
- Input file formats must be standard formats that are recognized by QHM and must be identified during program setup.
- QHM Output
-
- In the input file, the user will specify the nature and form of outputs required after a simulation run: each output file is identified in terms of a Series and ID number. The program, in UTILITY/SET RUN OPTIONS, will ask the user to select the name and extension for the output file and to select output options.
- QHM ID and Series Numbers
- An ID number is used by QHM to identify a file that contains a time series of flow data that is generated by the program. ID numbers are assigned by the user to identify a flow series at the outlet of a sub-watershed, watershed, pond, reservoir, or channel. Because output quality data, if generated, will be contained in the same file as the flow data, they will also be identified by the same ID number.
- The maximum number of flow series files that is retained by the program is 24. If a simulation run creates more than 24 flow series, the user must decide which of the previously created files will be overwritten in order to reassign the ID number to another series; the data in the overwritten files will be lost. In many cases this will not matter, e.g., after flows simulated for two sub-watersheds are combined, the individual files may not be of interest.
- If the user wants to retain a record of a flow series before an ID number is reassigned, that series can be recorded by the PRINT SERIES, DUMP PRINT, or DUMP PLOT commands.
- In addition to an ID number, each outflow series is also assigned a Series Number. Series Numbers are not recognized by the program; they are intended to allow the user to keep track of files when many files are generated by a single simulation run.
- If a simulation run does not generate more than 24 flow series, they will all be identified by their ID numbers; in this case Series Numbers, although they must be entered, will be redundant, and dummy values can be used.
- QHM Time Steps
- Input data time steps may be 5, 10, 15, 20, 30 or 60 minutes, or 24 hours, for precipitation; monthly for evaporation; or hourly or daily for flow.
- The program can be instructed to perform calculations based on any specified time step. If the calculation time step is less than the precipitation time step, the program will use the average precipitation value in each calculation time step. If the calculation time step exceeds the precipitation time step, the latter will be used as the calculation time step.
- Time steps for input precipitation data are specified in the START command. Calculation time steps are specified in the GENERATE command. If a flow series not generated by the program is to be provided using the STORE command, the data input time step will be identified under that command. The routing time step for the POND, RESERVOIR, and REACH commands is specified in those commands.
- QHM SAMPLE FILES
- Table 1 lists sample input files that are included with the program, sample data files that are recognized by each input file and indicates the program command that the input file is intended to illustrate. It also indicates the data format of each sample data file.
-
- TABLE 1 - QHM SAMPLE INPUT FILES
-
- File Name
- TEST_GEN.INP
- TEST_EVAP.INP
-
- TEST_BSFLW.INP
- TEST_RES.INP
- TEST_SPL.INP
- TEST_QUA.INP
- TEST_RCH.INP
-
- TEST_SNO.INP
- TEST_SRM.INP
- TEST_ERSN.INP
- TEST_POND.INP
- TEST_BAT.INP
- TEST_EVENT.INP
-
- Associated Files
- RAIN85.PRE
- RAIN85.PRE
-
- RAIN85.PRE
- 2YR.PRE
- CAL65.PRE
- RAIN85.PRE
- 2YR.PRE
-
- SNOW.PRE
- SNOW.TMP+SNOW.PRE
- 2YR.PRE
- RAIN90.PRE
- 2YR.PRE
- EVENT10.PRE
- Purpose is to test:
- GENERATE COMMAND
- EVAPORATION IN GENERATE
- COMMAND
- BASE FLOW ALGORITHM
- ROUTE RESERVOIR COMMAND
- SPLIT SERIES COMMAND
- POLLUTION GENERATION
- REACH COMMAND FOR STREAM ROUTING
- WINTER SEASON SIMULATION
- SNOW REMOVAL/DISPOSAL
- INSTREAM EROSION INDEXES
- POND COMMAND
- BATCH POND OPERATION
- FREE FORMAT RAINFALL OPTION
- TABLE 2 - QHM SAMPLE DATA FILES
-
- File Name
- 2 YR.PRE
- CAL_65.PRE
- RAIN85.PRE
- RAIN90.PRE
- SNOW.PRE
- SNOW.TMP
- FLOW.FLO
- HEC.FLO
- EVENT_10.PRE
- EVENT_15.PRE
- EVENT_30.PRE
- EVENT_5.PRE
- Description
- rainfall data
- rainfall data
- rainfall data
- rainfall data
- winter precipitation data
- temperature data file
- flow sample file
- flow sample file
- rainfall data
- rainfall data
- rainfall data
- rainfall data
- Data Period
- 81-06-10 - 81-06-30
- 65-05-01 - 66-04-01
- 85-02-01 - 85-12-31
- 90-06-01 - 90-10-29
- 70-11-02 - 71-05-04
- 83-01-03 - 87-04-10
- 70-11-01 - 71-05-04
- 92-05-30 - 92-06-30
- 92-05-30 - 92-06-30
- 97-08-07 - 97-08-09
- 97-08-07 - 97-08-09
- 97-08-07 - 97-08-09
- 97-08-07 - 97-08-09
- Data Format
- AES Hourly
- AES Hourly
- HEC Hourly
- HEC Hourly
- AES Hourly
- AES Hourly
- AES Hourly
- IWD Hourly
- HEC Hourly
- 10min. file
- 15min. file
- 30min. file
- 5min. file
|
|
|
|
合作伙伴与授权机构 |
Altera全球合作培训机构
|
诺基亚Symbian公司授权培训中心 |
Atmel公司全球战略合作伙伴
|
微软全球嵌入式培训合作伙伴 |
英国ARM公司授权培训中心 |
ARM工具关键合作单位 |
|
|
|
我们培训过的企业客户评价: |
端海的andriod 系统与应用培训完全符合了我公司的要求,达到了我公司培训的目的。
特别值得一提的是授课讲师针对我们公司的开发的项目专门提供了一些很好程序的源代码, 基本满足了我们的项目要求。
——上海贝尔,李工
端海培训DSP2000的老师,上课思路清晰,口齿清楚,由浅入深,重点突出,培训效果是不错的,
达到了我们想要的效果,希望继续合作下去。
——中国电子科技集团技术部主任 马工
端海的FPGA 培训很好地填补了高校FPGA培训空白,不错。总之,有利于学生的发展,
有利于教师的发展,有利于课程的发展,有利于社会的发展。
——上海电子学院,冯老师
端海给我们公司提供的Dsp6000培训,符合我们项目的开发要求,解决了很多困惑我
们很久的问题,与端海的合作非常愉快。
——公安部第三研究所,项目部负责人李先生
MTK培训-我在网上找了很久,就是找不到。在端海居然有MTK驱动的培训,老师经验
很丰富,知识面很广。下一个还想培训IPHONE苹果手机。跟他们合作很愉快,老师很有人情味,态度很和蔼。
——台湾双扬科技,研发处经理,杨先生
端海对我们公司的iPhone培训,实验项目很多,确实学到了东西。受益无穷
啊!特别是对于那种正在开发项目的,确实是物超所值。
——台湾欧泽科技,张工
通过参加Symbian培训,再做Symbian相关的项目感觉更加得心应手了,理
论加实践的授课方式,很有针对性,非常的适合我们。学完之后,很轻松的就完成了我们的项目。
——IBM公司,沈经理
有端海这样的DSP开发培训单位,是教育行业的财富,听了他们的课,茅塞顿开。
——上海医疗器械高等学校,罗老师
|
我们最新培训过的企业客户以及培训的主要内容: |
|
一汽海马汽车 DSP培训
苏州金属研究院 DSP培训
南京南瑞集团技术 FPGA培训
西安爱生技术集团 FPGA培训,DSP培训
成都熊谷加世电气 DSP培训
福斯赛诺分析仪器(苏州) FPGA培训
南京国电工程 FPGA培训
北京环境特性研究所 达芬奇培训
中国科学院微系统与信息技术研究所 FPGA高级培训
重庆网视只能流技术开发 达芬奇培训
无锡力芯微电子股份 IC电磁兼容
河北科学院研究所 FPGA培训
上海微小卫星工程中心 DSP培训
广州航天航空 POWERPC培训
桂林航天工学院 DSP培训
江苏五维电子科技 达芬奇培训
无锡步进电机自动控制技术 DSP培训
江门市安利电源工程 DSP培训
长江力伟股份 CADENCE 培训
爱普生科技(无锡 ) 数字模拟电路
河南平高 电气 DSP培训
中国航天员科研训练中心 A/D仿真
常州易控汽车电子 WINDOWS驱动培训
南通大学 DSP培训
上海集成电路研发中心 达芬奇培训
北京瑞志合众科技 WINDOWS驱动培训
江苏金智科技股份 FPGA高级培训
中国重工第710研究所 FPGA高级培训
芜湖伯特利汽车安全系统 DSP培训
厦门中智能软件技术 Android培训
上海科慢车辆部件系统EMC培训
中国电子科技集团第五十研究所,软件无线电培训
苏州浩克系统科技 FPGA培训
上海申达自动防范系统 FPGA培训
四川长虹佳华信息 MTK培训
公安部第三研究所--FPGA初中高技术开发培训以及DSP达芬奇芯片视频、图像处理技术培训
上海电子信息职业技术学院--FPGA高级开发技术培训
上海点逸网络科技有限公司--3G手机ANDROID应用和系统开发技术培训
格科微电子有限公司--MTK应用(MMI)和驱动开发技术培训
南昌航空大学--fpga 高级开发技术培训
IBM 公司--3G手机ANDROID系统和应用技术开发培训
上海贝尔--3G手机ANDROID系统和应用技术开发培训
中国双飞--Vxworks 应用和BSP开发技术培训
|
上海水务建设工程有限公司--Alter/Xilinx FPGA应用开发技术培训
恩法半导体科技--Allegro Candence PCB 仿真和信号完整性技术培训
中国计量学院--3G手机ANDROID应用和系统开发技术培训
冠捷科技--FPGA芯片设计技术培训
芬尼克兹节能设备--FPGA高级技术开发培训
川奇光电--3G手机ANDROID系统和应用技术开发培训
东华大学--Dsp6000系统开发技术培训
上海理工大学--FPGA高级开发技术培训
同济大学--Dsp6000图像/视频处理技术培训
上海医疗器械高等专科学校--Dsp6000图像/视频处理技术培训
中航工业无线电电子研究所--Vxworks 应用和BSP开发技术培训
北京交通大学--Powerpc开发技术培训
浙江理工大学--Dsp6000图像/视频处理技术培训
台湾双阳科技股份有限公司--MTK应用(MMI)和驱动开发技术培训
滚石移动--MTK应用(MMI)和驱动开发技术培训
冠捷半导体--Linux系统开发技术培训
奥波--CortexM3+uC/OS开发技术培训
迅时通信--WinCE应用与驱动开发技术培训
海鹰医疗电子系统--DSP6000图像处理技术培训
博耀科技--Linux系统开发技术培训
华路时代信息技术--VxWorks BSP开发技术培训
台湾欧泽科技--iPhone开发技术培训
宝康电子--Allegro Candence PCB 仿真和信号完整性技术培训
上海天能电子有限公司--Allegro Candence PCB 仿真和信号完整性技术培训
上海亨通光电科技有限公司--andriod应用和系统移植技术培训
上海智搜文化传播有限公司--Symbian开发培训
先先信息科技有限公司--brew 手机开发技术培训
鼎捷集团--MTK应用(MMI)和驱动开发技术培训
傲然科技--MTK应用(MMI)和驱动开发技术培训
中软国际--Linux系统开发技术培训
龙旗控股集团--MTK应用(MMI)和驱动开发技术培训
研祥智能股份有限公司--MTK应用(MMI)和驱动开发技术培训
罗氏诊断--Linux应用开发技术培训
西东控制集团--DSP2000应用技术及DSP2000在光伏并网发电中的应用与开发
科大讯飞--MTK应用(MMI)和驱动开发技术培训
东北农业大学--IPHONE 苹果应用开发技术培训
中国电子科技集团--Dsp2000系统和应用开发技术培训
中国船舶重工集团--Dsp2000系统开发技术培训
晶方半导体--FPGA初中高技术培训
肯特智能仪器有限公司--FPGA初中高技术培训
哈尔滨大学--IPHONE 苹果应用开发技术培训
昆明电器科学研究所--Dsp2000系统开发技术
奇瑞汽车股份--单片机应用开发技术培训
|
|
|
|
|